BrandHavells
Product is not available
13420.00 13420.00
Inclusive of all taxes
You Save: 0. Discount 0%
Name of Commodity | Submersible pump |
Capacity / Power | 1.0 HP |
Energy Efficient Motor | Motors are with B Class Insulation, which ensures that motor does't get burned and works smoothly even at high temperatures. |
Pump Performance | Higher performance of the pumps. Pumps have higher suction power and give high discharge in its operating range. |
Warranty | 1 Year |
Motor Insulation Class B | Motor design is compact. Motor temperature withstand capacity increases upto 115 °C . It protects motor from winding burning due to wide voltage fluctuations resulting in high temperature increase. Most of the pumps available in market are with B Class insulation, which provides insufficient protection. |
IP 68 Protection | Pump suitable for under water operation |
Motor Windings: | PVC coated copper winding wires gives high motor efficiency. |
Pump Shaft: | Stainless Steel Shaft (SS 410) of the pump set protects the pump shaft from rusting due to hard water. Hard SS shaft has less wear and tear providing longer life to pump. Other pumps available in market have EN 8 shafts, which get rusted easily and have shorter life in hard water. |
Pump Casting: | High Grade Pump Castings (FG 200 grade) ensures very slow rusting of pump. Pump life is increases due to less rusting and wear and tear. Most of the pumps available in market have low grade castings, which causes rusting of pump parts. |
Pump Seal: | High quality mechanical seal has long life. It completely seals and prevents the water entering into the motor side. It works for longer period with lesser wear and tear. |
Impeller: | SS Impeller |
Home Service: | Home service of the pumps assures trouble free service. |
Pump Warranty: | Havells pumps are available with 1 Year Warranty. |
Suitable for | Single Phase supply |
Applications | Under ground water tanks in Apartments, bungalows, farm-houses, fountains |
Operating water temperature | up to 65 °C |
Maximum working pressure | 3 kg/cm² |
Low power consumption | Yes |
Pipe size | 25 mm x 25 mm (2.5 cm x 2.5 cm) |
Motor speed (Revolution per minute) | 2900 Revolution per minute |
Motor body | SS / Special grade Cast Iron |
Motor stator | Low watt loss silicon steel lamination |
Winding type | PVC insulated Copper winding |
Direction of rotating | Anti-clockwise when viewed from driving end |
Dynamically balanced rotor | Yes |
Pump casing | Graded Cast Iron |
Impeller | Stainless Steel |
Shaft | Stainless Stell (SS-410) |
Rated power input (kW) | 0.75 kW |
Power (HP) | 1 HP |
Voltage operating range (V) | 180 V to 240 V |
Rated frequency | 50 Hz |
Rated input current | 8.5 Ampere |
10 metre in L | 225 |
12 metre in L | 195 L |
14 metre in L | 185 |
16 metre in L | 180 |
18 metre in L | 160 |
20 metre in L | 150 |
22 metre in L | 135 |
24 metre in L | 110 |
26 metre in L | 85 |
28 metre in L | 40 |
30 metre in L | 20 |
Weight (kg) | 23 kg |
Height | 269 mm |
Width | 179 mm |
Depth | 328 mm |
Packaging Dimensions (cm) | 38 cm x 21 cm x 35 cm |
Power supply cable | Yes |
Net contents | 1 pump set, 1 power cord of 5 metre length, 1 control panel, 1 instruction manual, 1 warranty card |
Warranty | 1 Year |